Runco Vision 85 Especificaciones descargar pdf (Pagina 46)

Installation

34 Vidikron Vision 85 Owner’s Operating Manual

PRE

IMINAR

The anamorphic lens will almost always be angled with respect to the projector; this is

normal. Once the proper lens angle has been set, firmly tighten the Pitch Adjustment Screws

to secure the lens in place.

Adjusting the Yaw: Loosen the Yaw/Z-Adjustment Levers to allow the lens to pivot freely

from side to side. Then, angle the lens to even out any left-right pincushion distortion:

Once the proper lens angle has been set, firmly tighten the Yaw/Z-Adjustment Levers to

secure the lens in place.

There may be some pincushion distortion even after the lens is properly

adjusted, especially at shorter throw distances. If this is the case, Vidikron

recommends that you slightly over-scan the image into the screen frame

area to mask the distortion.

Correct Lens Angle

Incorrect Lens Angle

Note

Anamorphic Lens (Top View)

Wrong Position

Correct Position

Downloaded From projector-manual.com Vidikron Manuals

1 2 ... 41 42 43 44 45 46 47 48 49 50 51 ... 87 88

Sin comentarios

Runco Vision 85 Especificaciones Pagina 46