Runco CL-410 Especificaciones Pagina 48

  • Descarga
  • Añadir a mis manuales
  • Imprimir
  • Pagina
    / 57
  • Tabla de contenidos
  • SOLUCIÓN DE PROBLEMAS
  • MARCADORES
  • Valorado. / 5. Basado en revisión del cliente
Vista de pagina 47
48
1 If the projector is running, press
OFF on the remote control to
turn off the power. Wait until the
cooling fan stops.
2 Disconnect the power cord and
wait at least an hour for the lamp
to cool.
3 Remove the lamp cover.To
remove, loosen the screws
that secure the lamp unit
cover. Then open the cover.
4 Insert the new lamp.
5 Replace the lamp cover.
Tighten the screws.If the
lamp and lamp cover are not
correctly installed, the power
will not turn on, even if the
power cord is connected
to the projector.
OFF ON
ENTER
LIGHT
EXIT
MENU
COMP
1
VIDEO
RGB
HD
COMP
2
S-VID
1
DVI
Appendix: Maintenance
Note:
Allow the lamp to cool
before removing. Do not
touch the glass surface of
the lamp or the inside of the
projector when hot.
To avoid injuring yourself
or damaging the lamp,
carefully follow the steps
below.
Do not loosen other screws
except for the lamp cover.
Removing and Installing
the Lamp
Vista de pagina 47
1 2 ... 43 44 45 46 47 48 49 50 51 52 53 ... 56 57

Comentarios a estos manuales

Sin comentarios