Runco XP-103DHD Especificaciones Pagina 34

  • Descarga
  • Añadir a mis manuales
  • Imprimir
  • Pagina
    / 126
  • Tabla de contenidos
  • SOLUCIÓN DE PROBLEMAS
  • MARCADORES
  • Valorado. / 5. Basado en revisión del cliente
Vista de pagina 33
Installation
18 Runco LS-10d and LS-10HBd Installation/Operation Manual
PRE
L
IMINAR
Y
3.2
Quick Setup
Table 3-1 gives a quick overview of the LS-10 installation process. The sections following
this one provide detailed instructions.
Table 3-1. Installation Overview
Step Procedure
For Details, Refer to
page...
1
Choose a location for the projector 19
2
Install anamorphic lens mounting assembly (optional) 25
3
Mount the projector 30
4
Connect the DHD Controller to the projector 33
5
Connect signal sources to the DHD Controller 34
6
Connect external controller to RS-232 port (optional) 38
7
Connect 12-volt trigger outputs to anamorphic lens
transport and/or other equipment (optional)
39
8
Connect projector, DHD Controller and lens motor (if
present) to AC power and power up
41
9
Primary lens adjustments: projected image size (zoom),
position (shift) and focus
22, 42
10
For rear-screen and/or ceiling-mount installations, select
the proper picture orientation
42
11
Install and adjust secondary anamorphic lens (optional) 45
12
Display calibration: adjust the following for each input and
display mode (resolution and frame rate); save settings
when finished:
• Aspect ratio
• Brightness
• Contrast
• Color level
• Tint
• Sharpness
• White Balance
49
Vista de pagina 33
1 2 ... 29 30 31 32 33 34 35 36 37 38 39 ... 125 126

Comentarios a estos manuales

Sin comentarios