Runco REFLECTION Especificaciones descargar pdf (Pagina 46)

Installation

34 Runco RS-1100 Series Owner’s Operating Manual

PRE

IMINAR

Attaching Lens Mounting Assembly to Lens Motor Carriage Plate:

1. Remove the two Yaw/X Adjustment Levers and 1/4-20 Fiber Washers from the

bottom of the lens mounting assembly.

2. Place the Lens Mounting Assembly on top of the Lens Motor Carriage Plate. Position

the bracket so that the long slot at the bottom of the bracket is perpendicular to the

corresponding slots on the carriage plate.

3. Secure the Lens Mounting Assembly to the plate with the Yaw/X Adjustment Levers

and Washers that you removed in Step 1.

4. Attach the Lens Adapter Ring to the Pitch Adjustment Yoke using the three Lens

Rotation Set Screws; see

Figure 3-17. Then, attach the lens to the Lens Adapter Ring

by threading it clockwise.

Figure 3-17. Attaching the Anamorphic Lens to the Lens Ring

LENS THREADS

INTO RING

Lens Rotation Set Screws

Downloaded From projector-manual.com Runco Manuals

1 2 ... 41 42 43 44 45 46 47 48 49 50 51 ... 91 92

Sin comentarios

Runco REFLECTION Especificaciones Pagina 46