Runco XtremeProjection X-450d Especificaciones Pagina 40
- Pagina / 156
- Tabla de contenidos
- SOLUCIÓN DE PROBLEMAS
- MARCADORES
Valorado. / 5. Basado en revisión del cliente
Installation
24 Runco X-400d/X-450d Installation/Operation Manual
PRE
L
IMINAR
Y
Folded Optics In rear-screen applications where space behind the projector is limited, a mirror may be
used to fold the optical path, as shown in Figure 3-5. The position of the projector and
mirror must be accurately set. If you are considering this type of installation, contact your
dealer for assistance.
Figure 3-5. Folded Optics
➤
For best performance, always use “first-surface” mirrors in your
rear-projection installation (as opposed to conventional,
“second-surface” mirrors with the reflective surface behind a
transparent substrate such as glass or acrylic).
First-surface mirrors provide a strict reflection without the
“ghosting” effect seen with a second surface mirror, where a faint
secondary reflection could be observed coming from the front
surface of the glass.
This is especially critical for 3D viewing; with a conventional
second-surface mirror, the resulting image quality may be
unacceptable.
Screen
Mirror
Tip
- XtremeProjection™ Series 1
- X-400d and X-450d 1
- Warranty 3
- Important Safety Instructions 7
- Compliance Information 9
- Table of Contents 11
- List of Figures 15
- 1. Introduction 17
- Using This Manual 18
- Description, Features 19
- Introduction 20
- 2. System Overview 21
- Projector 22
- 1 2 3 4 65 7 23
- DC-300 Dimension 24
- Digital Controller 24
- System Overview 25
- Remote Control Unit 28
- X-400d/X-450d Active 32
- 3D Emitter 32
- 3. Installation 33
- Quick Setup 34
- Installation 35
- Considerations 35
- Estimating Throw Distance 36
- Throw Distance (TD) = 36
- Screen width (w) 36
- Ceiling Installation 38
- Floor Installation 38
- Installing the Optional 42
- CineWide Lens Mount 42
- Mounting the 48
- Interconnections 50
- Dimension Digital Controller 51
- Audio Processor/ 52
- Switcher 52
- Secondary Display 52
- (to ctrl. system) 53
- (from ctrl. system) 53
- AutoScope Lens Motor 54
- Notebook Computer 57
- HDMI source 58
- COMPONEN T 59
- VIDEO OUT 59
- Computer 60
- Gaming Console 61
- DVD/DTV STB 61
- Camcorder 62
- Active 3D Emitter 63
- Turning on the Power 64
- Adjusting the Image 66
- Geometry 66
- Installing and 68
- Adjusting the 68
- CineWide Anamorphic 68
- Lens threads into ring 70
- Too Far Right 71
- Too Far Left 71
- Correct position 71
- Too High 72
- Anamorphic Lens (Top View) 73
- Correct Lens Angle 75
- Incorrect Lens Angle 75
- Wrong Position 76
- Correct Position 76
- 4. Operation 77
- 4:3 Image on 81
- 16:9 Display 81
- (Letterbox aspect ratio) 81
- 1080i HDTV Image 82
- 720p HDTV Image 82
- Below Black 84
- 3D Processing 91
- Reverse Eyes 91
- 7 Auto Color Enable 96
- 7 Test Pattern Enable 96
- Operation 100
- Primary Alignment 102
- Input Names 103
- SRC 1 Key 105
- Power Button 114
- Battery Status 114
- LED (Red/Blue) 114
- Lamp Replacement 117
- Troubleshooting Tips 118
- 6. External Control 121
- External Control 122
- Table 6-1. Serial Commands 123
- DBO R/W Yes -100 100 No 125
- DGO R/W Yes -100 100 No 126
- DRO R/W Yes -100 100 No 126
- IBO R/W Yes -32 32 No 127
- IGO R/W Yes -32 32 No 128
- IRO R/W Yes -32 32 No 129
- SHO R/W Yes -50 50 No 134
- (VSH+) or (VSH-) to 137
- (ZOM+) or (ZOM-) to 137
- Using Discrete IR 138
- (Standard Mode) 139
- (Standard Mode) (continued) 140
- (Extended Mode) 142
- Controller 143
- (continued) 144
- 7. Specifications 145
- Dimension Digital 148
- Specifications 148
- Supported Timings 150
- X-400d/X-450d 154
- Dimensions 154
- 020-1203-00 Rev. A 156
- September 2012 156
Relacionado con productos y manuales para Proyectores de datos Runco XtremeProjection X-450d
Proyectores de datos Runco VX-60d Especificaciones
(126 paginas)
(126 paginas)
Proyectores de datos Runco DR-300c Manual de usuario
(36 paginas)
(36 paginas)
Proyectores de datos Runco CL-420 Especificaciones
(72 paginas)
(72 paginas)
Proyectores de datos Runco RS-440LT Especificaciones
(41 paginas)
(41 paginas)
Proyectores de datos Runco VX-8d Especificaciones
(104 paginas)
(104 paginas)
Proyectores de datos Runco VX-2c Guia de preparacion
(36 paginas)
(36 paginas)
Proyectores de datos Runco CL-500 Manual de usuario
(32 paginas)
(32 paginas)
Proyectores de datos Runco XP-103DHD Especificaciones
(126 paginas)
(126 paginas)
Proyectores de datos Runco VX-4000d Especificaciones
(108 paginas)
(108 paginas)
© 2020, manymanuals.es. Todos los derechos reservados | 1.181 s |
Manymanuals.com
Manymanuals.de
Manymanuals.fr
Manymanuals.it
Manymanuals.pl
Manymanuals.cz
Manymanuals.es
Manymanuals-pt.com
Comentarios a estos manuales