Runco REFLECTION CL-510 Especificaciones descargar pdf (Pagina 34)

Installation

22 Runco SC-1 Owner’s Operating Manual

PRE

IMINAR

Vertical and Horizontal

Position

Proper placement of the projector relative to the screen will yield a rectangular,

perfectly-centered image that completely fills the screen.

Ideally, the projector should be positioned perpendicular to the screen and in such a way

that the lens center and screen center are aligned with each other, as shown in

Figure 3-2.

Figure 3-2. Projector Placement

Vertical and Horizontal

Lens

Shift

If it is not possible to align the projector and screen as shown in Figure 3-2, you can use

the mechanical lens shift controls to center the image on the screen. Lens shift is generally

expressed as a percentage of the screen height or width, as shown in

Figure 3-3 and

Figure 3-4.

Figure 3-3. Vertical Lens Shift (Example only)

➤

Screen

Height

Floor

Lens Center

Projection Distance

Lens Center

➤

50% OFFSET

50% Offset

0% Offset

Note: This is a general example of lens shift. Projectors vary in their shift capabilities. No

particular lens or projector is shown in this example.

1 2 ... 29 30 31 32 33 34 35 36 37 38 39 ... 125 126

Sin comentarios

Runco REFLECTION CL-510 Especificaciones Pagina 34