Runco 3Dimension D-113d Especificaciones Pagina 73

  • Descarga
  • Añadir a mis manuales
  • Imprimir
  • Pagina
    / 152
  • Tabla de contenidos
  • SOLUCIÓN DE PROBLEMAS
  • MARCADORES
  • Valorado. / 5. Basado en revisión del cliente
Vista de pagina 72
Installation
D-113d Projection System Installation/Operation Manual 57
PRE
L
IMINAR
Y
Attach Lens Mounting Assembly to Lens Motor Carriage Plate:
1. Remove the two Yaw/X Adjustment Levers and Washers (item #8) from the bottom of
the Anamorphic Lens Holder (item #6).
2. Place the Anamorphic Lens Holder on top of the AutoScope Carriage Plate (item #7).
Position the bracket so that the long slot at the bottom of the lens holder is
perpendicular to the corresponding slots on the plate.
3. Secure the Anamorphic Lens Holder to the plate using the Hex Bolts/Washers
(item #9) and Yaw/X Adjustment Levers that you removed in Step 1.
4. Use the Height/Y Adjustment T-Screws/Washers (item #4), Pitch Adjustment
T-Screws/Washers (item #5) and T-Nuts (item #1) to attach the Pitch Adjustment
Yoke and Lens Adapter Ring to the Anamorphic Lens Holder. The Yoke should be
as close to the primary lens as possible.
5. Attach the lens to the Lens Adapter Ring by threading it clockwise.
Figure 3-26. Attaching the Anamorphic Lens to the Lens Ring
Lens threads into ring
F
O
C
U
S
Vista de pagina 72
1 2 ... 68 69 70 71 72 73 74 75 76 77 78 ... 151 152

Comentarios a estos manuales

Sin comentarios